塘沽地电阻率观测轻轨干扰降噪处理     

王晓蕾  谷国梁  马义山  刘传军  徐小远  杨建思 《地震地磁观测与研究》2019,40(4):81-88

随着地铁轻轨的迅速发展，我国大多数地电阻率测项受到不同程度干扰，诸多学者为此提出采用小波方法进行滤波的建议。文中拟采用小波和HHT滤波方法，以受津滨轻轨干扰严重的塘沽地电阻率观测资料为例，进行降噪处理，对比2种方法的滤波效果，以获得更好的滤波方法。  相似文献   

宽频带流动地震台站中地震计浅井式安装研究     

刘政一  袁松湧  许卫卫  徐天龙 《地震地磁观测与研究》2019,40(4):130-137

在井下地震观测中，各种地表背景噪声具有显著衰减作用，针对中国地震科学台阵现有大量非专用浅井式设计的Guralp CMG系列地震计，以及目前多个新获批项目在高背景噪声区域的观测需求，设计一种野外实用浅井观测方式，在北京国家地球观象台进行不同深度、不同井壁材质的观测对比实验，分析研究观测数据的背景噪声功率谱密度，结果表明，随着浅井深度的增加，地震背景噪声在垂直、水平向得到改善，改善程度随频率变化有所不同。分析认为，在华北现有地质环境下，6 m浅井是较为经济的观测方式，性价比高、占地小、施工简便，可用于后续多个项目的宽频带流动地震台阵观测。  相似文献   

地震观测仪器自动监控软件设计与实现     

姜佳宁  吴利军  徐磊  赵祖虎  方宏 《地震地磁观测与研究》2019,40(4):167-175

结合地震地球物理观测台网台站监测工作实际，研制一款地震观测仪器自动监控软件。该软件适用于不同网络环境下IP类仪器设备的网络实时或定时自动监控，地球物理观测类仪器时钟、状态和观测数据的定时自动监控，能自动识别当日观测数据中的无效数据、变幅异常、干扰、地震和限幅等信息，无需借助其他硬件和软件即可将告警信息以短信方式发送给值班人员和管理人员，可实现对仪器原始观测数据的自动备份和手动恢复，及对仪器的一键重启和校正时钟等控制类操作，无需跨平台操作即可查看当日观测数据曲线及分析数据的完整性和有效性，从而实现对仪器的统一高效管理。  相似文献   

2017年九寨沟MS 7.0地震震源深度测定     

郑国栋  梁姗姗  邹立晔  梁建宏  徐志国  安祥宇 《地震地磁观测与研究》2019,40(5):21-28

为了更好地确定2017年8月8日九寨沟M_(S )7.0地震震源深度其发震机理,利用四川、甘肃和青海区域地震台网的观测波形数据,采用多种方法研究了此次地震的震源深度。首先,采用gCAP方法反演了九寨沟M_(S )7.0地震的震源机制解和矩心深度,结果显示,节面Ⅰ走向243°/倾角87°/滑动角-158°,节面Ⅱ走向151°/倾角68°/滑动角-3°,矩震级为M_(W )6.5,矩心深度为8 km;然后,采用ISOLA近震全波形方法反演了此次地震的震源机制解,反演结果与gCAP方法结果相差不大,矩心深度为7 km;最后,通过sPn震相与Pn震相之间的走时差测定此次地震初始破裂震源深度,结果显示深度约为12 km。研究表明,九寨沟M_(S )7.0地震的矩心深度为7—8 km,初始破裂深度约为12 km。  相似文献   

不同水位和竞争模式对典型湿地植物生态化学计量特征的影响     

李旭  于洁  李峰  胡聪  曾静  侯志勇  谢永宏  陈心胜 《湖泊科学》2019,31(6):1651-1661

以洞庭湖典型湿地植物辣蓼为目标植物,短尖苔草为邻近植物,通过控制实验研究不同水位(30、0和-30 cm)和竞争(无竞争、全部竞争、地上竞争和地下竞争)模式下目标植物生长及生态化学计量特征的变化.结果表明:水位处理显著影响不同竞争模式下的生物量积累,辣蓼生物量随水位增加显著降低;-30 cm水位无竞争模式下生物量最大,为10.84±1.52 g.在30 cm和0 cm水位梯度下,不同竞争模式下的生物量间无显著差异.但-30 cm水位下,地下竞争模式下的辣蓼生物量积累较全竞争模式和地上竞争模式下显著增多,说明非胁迫条件下,辣蓼和苔草的竞争以地上竞争为主.水位处理对辣蓼叶片、茎和根的氮、磷含量影响显著,30 cm水位下,叶片氮、磷含量显著高于其他水位下的含量.在-30cm水位下,叶片C∶N和C∶P显著高于其他水位下的比值,分别为48.08±3.85、590.3±43.4.相比于对照处理(无竞争),竞争作用下的辣蓼总氮含量降低,而C∶N值增加,N∶P值降低,这可能是因为竞争作用导致辣蓼对氮的吸收减少所致.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

Direct Conservative Domain in the Continuous Galerkin Method for Groundwater Models          下载免费PDF全文

Qiang Wu  Yingwang Zhao  Yu‐Feng F. Lin  Hua Xu  Hanxiong Zhang 《Ground water》2018,56(3):491-500

The continuous Galerkin finite element method is commonly considered locally nonconservative because a single element with fluxes computed directly from its potential distribution is unable to conserve its mass and fluxes across edges that are discontinuous. Some literature sources have demonstrated that the continuous Galerkin method can be locally conservative with postprocessed fluxes. This paper proposes the concept of a direct conservative domain (DCD), which could conserve mass when fluxes are computed directly from the potential distribution. Also presented here is a method for modifying the advection fluxes to obtain different conservative domains from the DCDs. Furthermore, DCDs are used to analyze the local conservation of several postprocessing algorithms, for which DCDs provide the theoretical basis. The local conservation of DCDs and the proposed method are illustrated and verified by using a hypothetical 2‐D model.  相似文献   

福建省复杂地形下旬平均气温分布式模拟     

李威鹏  邱新法  曾燕  施国萍  徐金勤  王丹丹 《热带地理》2019,39(2):229-236

为建立高时空分辨率的福建省复杂地形下气温栅格数据集，利用福建省及其周边33个常规气象站观测资料，基于数字高程模型（DEM）数据，综合考虑海拔、太阳总辐射、地表长波有效辐射对旬平均气温的影响，模拟了福建省复杂地形下旬均温的空间分布。结果表明：1）常规站验证结果显示：各旬气温绝对误差平均值（MAE）最小为0.46℃，最大为2.3℃，全年平均为0.87℃；加密站验证结果显示，MAE最大为2.3℃，最小0.5℃，全年平均为0.96℃。2）模拟结果能反映旬均温的宏观分布规律与局地细节特征。宏观范围内，旬均温受纬度影响较大，由北至南气温逐渐升高，沿海地区旬均温整体高于内陆，山区旬均温明显较低；局地范围内，各坡向上气温差异显著，海拔越高、坡度越大，差异越明显；地形因子对旬平均温的影响具有季节差异，具体表现为冬季时地形因子对旬均温的影响最大，秋季次之，春夏季节中地形因子对旬均温的影响最弱。  相似文献   

Laboratory Experiments on an Internal Solitary Wave over a Triangular Barrier     

MU Haidi  CHEN Xu  LI Qun 《中国海洋大学学报(英文版)》2019,(5)

Laboratory experiments were conducted to investigate the evolution of interfacial internal solitary waves(ISWs) incident on a triangular barrier. ISWs with different amplitudes were generated by gravitational collapse. The ISW energy dissipation and turbulence processes were calculated as waves passed over the triangular barrier. Experimental results showed that ISWs were reflecting back off the triangular barrier, and shoaling ISWs led to wave breaking and mixing when waves propagated over the obstacle. Wave instability created the dissipation of energy as it was transmitted from waves to turbulence. The rate of ISW energy dissipation, the maximum turbulent dissipation, and the buoyancy diffusivity linearly increased with the increase in the incident wave energy.  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献